聯系人：談生
手機：13703090369
郵箱：hsyixin@sina.cn
地址：廣東省鶴山市古勞鎮三連工業區六區36號
Detailed introduction
Solvent based ink for PVC decorative film, suitable for use in gravure printing machines, with a wide printing speed range of 25-120 meters/minute. The ink has high color strength, good tint power, high light resistance and heat resistance, and is very suitable for special processes of heat lamination.
Common models:
PVC Varnish
PVC-A Varnish
IV-1020 White
IV-2010 Yellow (Containing heavy metals)
IV-2020 Yellow (Containing heavy metals)
IV-2200 Yellow
IV-3010 Red
IV-3120 Red
IV-3130 Red
IV-3195 Permanent Red (high heat resistance, high bonding strength)
IV-3395 Sturdy Red (high heat resistance, high bonding strength)
IV-4080 Process Blue
Iv-4100 Purple
IV-6010 Extra Green
IV-5010 Extra Black
IV-8010 Silvery
IV-9010 Green Gold
IV-9020 Red Gold
IV02-8030 Pearl Silver White
Printing Conditions:
Printing viscosity: 10-25 seconds Zahn cup 3#,at 25℃
Diluting ratio: Ink: PVC Varnish=1:0.8-1.5
Printing Speed: 25-120M/min
Cylinder:175 lines/inch
Drying speed: ethyl ester for fast drying and butyl ester for slow drying
Heat lamination temperature: below 180℃ (depending on the thickness of the PVC film)
Precautions：
1. The environmental requirements of ink depend on local regulations
2. The printing speed of ink is easily affected by the addition of solvents afterwards
3. Avoid adding too many ketones to cause stretching and deformation of the printing film
4. The temperature and speed of heat lamination should be adjusted according to the thickness of the film
- 上一個：YLP type lamination ink
- 下一個： YG凹版油墨
